Nos Services

Un service professionnel et fiable.

Abribus standards

Les abribus standards sont la solution de référence des réseaux de transport canadiens — un abri autoportant ou en porte-à-faux à trois parois vitrées, banc…

  • 6063-T6 aluminum frame with structural posts engineered to NBCC 2020 snow and wind loads
  • 6 mm tempered safety glass walls to CSA Z97.1 (8–10 mm polycarbonate option for vandal-prone sites)
  • ACM or polycarbonate twin-wall roof, sloped 3° away from boarding edge
En savoir plus →

Abribus solaires

Les abribus solaires ajoutent un réseau photovoltaïque sur le toit, un régulateur de charge et une batterie au lithium-fer-phosphate (LiFePO₄) pour que l'abri…

  • 120–340 W monocrystalline PV panels sized to install latitude (Toronto 3.6 PSH → Yellowknife 0.8 PSH)
  • LiFePO₄ battery 100–400 Ah with 3–5 days autonomy and heated enclosure for sub-arctic deployments
  • MPPT charge controller with Bluetooth telemetry and remote state-of-charge monitoring
En savoir plus →

Abribus chauffés

Les abribus chauffés sont essentiels sur les circuits où l'attente dépasse 10 minutes et où la température extérieure descend sous -15 °C — ce qui couvre la…

  • 800–2400 W radiant ceiling panel sized to shelter footprint and design temperature
  • Insulated ceiling cassette + double-glazed argon-filled IGU walls (U=1.4 W/m²K)
  • PIR motion sensor and wall thermostat — heat only when rider present, 20% standby
En savoir plus →

Abribus accessibles AODA

Les abribus accessibles respectent l'AODA, Norme de conception des espaces publics (Ontario Règl.

  • 1500 mm × 1500 mm clear floor area at rider zone (CSA B651-18 7.5)
  • AODA / RBQ / BC / MB / NS / NL accessibility-act compliance pack with stamped drawings
  • Tactile warning surface indicators (TWSI) at boarding edge per CSA B651-18 6.1.4
En savoir plus →

Abribus intelligents

Les abribus intelligents combinent la structure d'un abribus chauffé et accessible avec des afficheurs d'arrivée en temps réel, des capteurs de comptage, de la…

  • 27–43 inch outdoor 2500-nit LCD or e-paper real-time arrival display via GTFS-Realtime
  • CAT-M / NB-IoT cellular with LTE-M fallback; integrations for TTC, STM, TransLink, OC Transpo, Calgary, Edmonton, Winnipeg, Halifax
  • Passenger-count sensor (3D ToF, 95% accuracy) and dwell-time analytics module
En savoir plus →

Abribus sur mesure

Les abribus sur mesure sont conçus de A à Z pour s'intégrer aux quartiers patrimoniaux, plans directeurs de campus, environnements de marque et sites…

  • In-house design studio: schematic → developed → stamped CD over 8 weeks
  • Provincial P.Eng. stamps for snow/wind/seismic + footing design to local frost depth
  • Materials library: timber-frame cedar, fritted laminated glass, Cor-Ten weathering steel, GFRC roofs, terrazzo benches
En savoir plus →

Abribus publicitaires

Les abribus publicitaires intègrent un ou deux panneaux d'affichage rétroéclairés (typiquement 6-sheet, 1200 × 1800 mm, le standard hors-domicile canadien)…

  • 1–2 back-lit 6-sheet (1200×1800 mm) Canadian-standard ad panels per shelter
  • 6500K LED light box with photometric uniformity ≥0.7, 45–80 W per panel
  • Roll-changeable poster system: under 4 minutes per swap, no tools, no glass removal
En savoir plus →

Abribus modulaires

Les abribus modulaires sont préassemblés en usine en travées standardisées qui se boulonnent sur le site pour créer des abribus de n'importe quelle longueur,…

  • 3-bay, 5-bay, 8-bay aluminum extrusion family — span 4 ft to 60 ft without custom engineering
  • Bay-level snow and wind engineering with continuous-canopy moment connections
  • Factory-glazed, factory-wired, flat-pack: 24 ft 8-bay shelter fits in one 53′ trailer
En savoir plus →

Bancs d'abribus

Les bancs d'abribus sont vendus comme produit autonome pour les sites où un abribus complet n'est pas justifié — arrêts ruraux à faible fréquence, circuits…

  • 1.2 m, 1.8 m, 2.4 m, 3.0 m lengths — same powder-coat library as our shelter line
  • 6063-T6 aluminum slat seat with 5 mm slats and 12 mm drainage gaps
  • AAMA 2604 powder coat for 10-year colour fastness in Canadian sun
En savoir plus →

Verres et panneaux de remplacement

Les verres et panneaux de remplacement maintiennent un réseau d'abribus existant en service après vandalisme, impact de véhicule, dommage météo ou cycle de…

  • 6 mm tempered glass and 8/10 mm polycarbonate in 12 most-shipped sizes — 48 hr delivery from Brantford ON
  • Replacement panels for Daytech, Tolar, Brasco, Creative Outdoor, JCDecaux, Pattison, Astral — not just our own
  • Cut to ±1 mm of original with clip-in hardware matched to your shelter brand
En savoir plus →

24/7 Emergency Service

Prêt à commencer ?

Contactez-nous pour un devis gratuit pour votre projet à Brantford.

20+ Years Experience Licensed & Insured Fast Response

Call Us Now

+1-888-287-7435

Available 24/7 — including holidays

Call Now

Foire Aux Questions

Questions fréquentes sur nos services

In Canada, standard freestanding bus shelters typically run **$6,500–$14,000** for the structure plus **$2,500–$6,000** for installation, including footings and electrical. Solar-powered units add **$1,500–$3,500**, and heated shelters add **$3,000–$7,000** depending on heater wattage and bench heat. Custom architectural shelters for heritage districts or campuses can reach **$25,000–$60,000+**. Volume orders of 20+ units typically reduce per-unit pricing by 15–25%. Lifecycle cost is the better lens than first-cost: a stamped-engineered shelter with a 10-year structural warranty and a 48-hour parts SLA typically delivers a **15–18 year service life** on the structure and **5–8 years** on glazing and benches before refresh, which works out to roughly **$1,000–$1,800 per shelter per year** total cost of ownership including maintenance. Off-grid solar and heated configurations carry a higher first-cost but eliminate trenched-electrical and ongoing utility charges, which on rural sites pays back inside 6 years.